Motorized lifting dissperser

TO MANUFACTURING AND SUPPLYING:
5 HP to 20 HP High Speed Disperser with 2 HP Mechanically Motorized lifting arrangement for mixing materials of specific gravity ranging from 1-1.3. Premix Capacity 500Lt to 1000 Ltrs.

BODY:
The frame will be made from angles and will house the body in Mild Steel, guide pipe. The base frame will be of 12mm. thick MS plates. The top frame will have the motor and the shaft assembly.

AGITATOR:
The shaft will be of 50mm.dia.in SS. MOC. and will be tapered to 45mm.dia. It will be supported by 2nos. ball bearings. The bearings will be housed in a MS. Housing which will be bolted to the top frame. The shaft will have a 8” (200mm) Cowles type impeller blade for dispersion.
 

DRIVE:

The shaft will be powered by a 15HP 1440RPM 3 Phase squirrel cage induction NON-FLP Motor through "V" groove pulley and belts. The shaft speed will be fixed 1440RPM. 1HP 1440 RPM Geared Motor for Screw Type Mechanical Lifting Arrangement of the stirrer. The limit switch will be provided at lifting and lowering point. Limit switch will be provided at the top & bottom of the lifting and lowering height.